官术网_书友最值得收藏!

Exporting for print

All editing of a model done. The mug isn't placed on the platform it's true, it is just kind of floating in space, but it is properly oriented so the 3D printer software will take care of positioning it. All that is left is to export the model in a format that can be sent to the 3D printer.

With the final mug selected (right-click) and when not in Edit Mode (Tab), carry out the following steps:

  1. Click on File on the top menu.
  2. Click on Export on the menu.
  3. In the menu that pops up click on Stl (.stl).
    Note

    Standard Tessellation Language (STL) is a file format that is used to describe the geometry of a shape. It doesn't store much else but the shape which is perfect for 3D printing. Almost every 3D printer can use a STL file.

By default the name of the STL will be the name of the project, which is perfect in this case. Just check to be sure the name is as you like it and click on the Export STL button.

Then open either MakerWare or ReplicatorG, open the STL, and prepare it for printing in the usual way.

主站蜘蛛池模板: 阜康市| 黄浦区| 珠海市| 湘潭县| 连云港市| 芒康县| 如皋市| 博兴县| 任丘市| 酒泉市| 龙口市| 金山区| 中江县| 通海县| 仙游县| 张掖市| 九龙坡区| 丰镇市| 靖宇县| 南川市| 泗水县| 弥渡县| 海原县| 太保市| 静海县| 涿州市| 大姚县| 漯河市| 华阴市| 武城县| 西青区| 砀山县| 毕节市| 葫芦岛市| 牟定县| 佛坪县| 定边县| 尉犁县| 东乌珠穆沁旗| 沽源县| 仲巴县|