Downloading the software and connecting the Galileo to a Windows machine

The first step in setting up your remote computer for development with the Galileo is to download the Integrated Development Environment (IDE) software from https://communities.intel.com/docs/DOC-22226. Choose the download link for Windows. This will download the IDE as well as the drivers for the Galileo. When this file is downloaded, unzip the file using an archive manager (for example 7-zip) to a location on your C:. This will un-archive a set of files and directories under the arduino-1.5.3-Intel.1.0.3 directory structure.

Plug the USB from the Galileo into your computer. If you are using a newer version of Microsoft Windows, when you plug the Galileo into the system it will try to install the drivers automatically. The device will fail to install. You'll need to install the drivers manually, using the following steps:

You will get a security warning; click on OK and the drivers will install. When your drivers are installed, you should see the following device when you navigate to Start Menu | Devices and Printers:

In this case, the device is connected to COM port 34. Note down the COM port the Galileo is connected to as you'll need that in a minute.