- Internet of Things Projects with ESP32
- Agus Kurniawan
- 136字
- 2021-06-24 16:02:54
Running the program
Now, you can configure your project with the make menuconfig command. You can carry out this task with the blinking project that we looked at in Chapter 1, Getting Started with ESP32.
After our program is flashed into the ESP32 board, we can use a serial program such as PuTTY or CoolTerm. For the demo, I used CoolTerm. You can download this tool from the following link: http://freeware.the-meiers.org.
You can then open a connection to the ESP32 board. If this is successful, you will see our program output on a serial tool. You can see my program output in Figure 2-6:
Figure 2-6: Program output on the CoolTerm serial app
Now that we've configured our sensors to read temperature and humidity, let's look at displaying this information using an LCD.
推薦閱讀
- Intel FPGA/CPLD設計（基礎篇）
- Android NDK Game Development Cookbook
- 電腦組裝、維護、維修全能一本通（全彩版）
- 硬件產品經理成長手記（全彩）
- 深入淺出SSD：固態存儲核心技術、原理與實戰（第2版）
- The Deep Learning with Keras Workshop
- 基于Apache Kylin構建大數據分析平臺
- 計算機組裝與維護（第3版）
- 數字媒體專業英語（第2版）
- 觸摸屏應用技術從入門到精通
- Learning Less.js
- 分布式存儲系統：核心技術、系統實現與Go項目實戰
- ARM接口編程
- 快·易·通：2天學會電腦組裝·系統安裝·日常維護與故障排除
- Nagios系統監控實踐（原書第2版）