- GB50730-2011冶金機械液壓、潤滑和氣動設備工程施工規范(英文版)
- 中國冶金建設協會
- 171字
- 2020-09-25 15:30:07
4.10 Pump and Pump Set
4.10.1 The installation of pumps and pump sets shall comply with the following requirements:
1 The longitudinal and horizontal center lines shall be adjusted,and the measurement by plumb wire should be carried out,with the allowable deviation of 10.0mm.
2 The elevation shall be adjusted,and the measurement by optical instrument or ruler should be carried out,with the allowable deviation of±10.0mm.
3 The axial levelness shall be adjusted,and the measurement by leveler should be carried out,with the allowable deviation of 0.1/1000 for centrifugal pump and 0.5/1000 for positive displacement pump.
4 The horizontal levelness shall be adjusted,and the measurement by leveler should be carried out,with the allowable deviation of 0.2/1000 for centrifugal pump and 0.5/1000 for positive displacement pump.
4.10.2 The assembly of couplings shall conform to related requirements of the current national standard General Code for Construction and Acceptance of Mechanical Equipment Installation Engineering(GB 50231).
- DL/T 5044-2014 電力工程直流電源系統設計技術規程
- GB 51180-2016 煤礦采空區建(構)筑物地基處理技術規范
- GB50168-2006電氣裝置安裝工程電纜線路施工及驗收規范(英文版)
- GB 51120-2015 通信局(站)防雷與接地工程驗收規范(英文版)
- 巖土靜力載荷試驗規程
- GB/T 50934-2013 石油化工工程防滲技術規范(英文版)
- GB 51214-2017 煤炭工業露天礦邊坡工程監測規范
- GB/T 50938-2013 石油化工鋼制低溫儲罐技術規范(英文版)
- DL 5068-2014 發電廠化學設計規范
- 建材工程術語標準
- GB 50372-2006 煉鐵機械設備工程安裝驗收規范 (英文版)
- GB/T 51116-2016 醫藥工程安全風險評估技術標準
- 鋰離子電池工廠設計標準
- GB/T 50417-2017 煤礦井下供配電設計規范
- GB/T 51126-2015 波分復用(WDM)光纖傳輸系統工程驗收規范(英文版)