官术网_书友最值得收藏!

4.2 Sanitary Protective Zone and Safety Distance

4.2.1 Sanitary protective zone shall be provided between the iron and steel enterprise and the residential area in accordance with the following sanitary safety distance:

1 Safety distance between the residential area and the surface ming fields,crushing and screening plant,and benefication plant for iron ore,clay minerals,manganese ore,dolomite and limestone mines is 300m-500m.

2 Sanitary safety distance between the iron and steel plant and the residential area shall be in accordance with those specified in Table 4.2.1.

Table 4.2.1 Sanitary safety distance(m)

img

Notes:1 Sanitary safety distance refers to the minimum distance from the boundary of the department(workshop or working section)which generates harmful factors to the boundary of the residential area.
2 Wind speed is taken as the average wind speed over the past 5 years in the area where the enterprise is located.

4.2.2 The sanitary protective zone shall make the most of the existing green area,water area,hill or nonconstructed area.

4.2.3 The sanitary protective zone shall be utilized and greened,but no houses for permanent living shall be built.

4.2.4 For industrial facilities of mines,their permanent and semi-permanent buildings and structures shall be arranged outside the boundary of blasting dangerous area of the surface mining field and shall meet the relevant requirements in current national standard GB 6722 Safety Regulation for Blasting.

When the buildings and structures closely related with excavation and transportation operation must be arranged inside the boundary of blasting dangerous area of the open pit,the distance between the said buildings and structures and the nearest blasting point shall be determined through calculation,and the precautions shall be taken accordingly.

4.2.5 In case of underground mining,the buildings and structures on the ground surface shall be located outside the surface subsidence limitation.Safety distance between the buildings and structures and the surface subsidence limitation shall be in accordance with those specified in Table 4.2.5 as well as the following requirements:

Table 4.2.5 Safety distance between surface subsidence limitation and the buildings and structures

img

Note:The safety distance for buildings and structures not listed in the table above may be determined with reference to the table based on their importance and application,etc.

1 For calculation of the safety distance,counting shall be made from the nearest edge when it comes to the buildings and structures,from the most outside engineering facility when it comes to railways and roads,and from boundary line or enclosure wall centerline of the plant(yard)when it comes to industrial site.

2 Safety distance of the cultural relics and memorial buildings of which the State Council has issued explicit order for protection shall meet the requirements of the pertinent laws,regulations and standards of the nation,and shall be submitted to the competent administrative authorities for approval after being analysed and reasoned.

主站蜘蛛池模板: 定日县| 兖州市| 昭苏县| 星座| 正蓝旗| 东安县| 南澳县| 九龙坡区| 兴文县| 从化市| 阳朔县| 宜章县| 宁海县| 神农架林区| 沿河| 潞城市| 富锦市| 台北县| 江孜县| 汝阳县| 大石桥市| 吉林省| 泸定县| 金平| 广汉市| 玛沁县| 肇庆市| 正镶白旗| 鄂伦春自治旗| 安达市| 静宁县| 罗田县| 兴城市| 石泉县| 东阿县| 体育| 内江市| 建平县| 曲沃县| 枣阳市| 大方县|