- Cisco Unified Communications Manager 8：Expert Administration Cookbook
- Tanner Ezell
- 235字
- 2021-08-06 20:02:46
Configuring IOS conference bridges
Hardware-based conference bridges are generally recommended over software conference bridges, as they support a larger range of codecs and free up server hardware for other tasks.
How to do it...
To configure an IOS conference bridge, perform the following:
- Navigate to the Conference Bridge page (Media Resources | Conference Bridge).
- Click on Add New to add a new conference bridge.
- For the Conference Bridge Type* select Cisco IOS Enhanced Conference Bridge.
- Specify the Conference Bridge Name. This is the name configured on the IOS device.
- Select an appropriate Device Pool and Device Security Mode.
- Set a Location if desired:
- Click on Save.
- Once the conference bridge has been configured on both the IOS device and on Unified Communications Manager, the conference bridge should show as registered.
Note
For an example configuration for an IOS device refer to Cisco's CallManager and IOS Gateway DSP Farm Configuration Example (http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml)
How it works...
Cisco IOS conference bridges use the Skinny Client Control Protocol (SCCP) to interface with Unified Communications Manager. When the IOS device receives a conference request from the Unified Communications Manager, the maximum conference resources per conference are pre-allocated. That means if a conference bridge is configured for a maximum of eight participants, eight slots will be reserved regardless of how many participants are in the conference.
- .NET Core 2.0 應用程序高級調試：完全掌握Linux、macOS和Windows跨平臺調試技術
- Learn pfSense 2.4
- HBase不睡覺書
- 計算機網絡技術與應用（第2版）
- Bootstrap從入門到項目實戰
- RocketMQ技術內幕：RocketMQ架構設計與實現原理
- 矛與盾：黑客攻防與腳本編程
- 十進制網絡技術及應用
- Kubeflow：云計算和機器學習的橋梁
- Apache Solr Beginner's Guide
- 網站說服力（第3版）
- web應用程序設計：ASP.NET/PHP/JSP技術教程
- NS2仿真實驗
- 系統工程的藝術：用基于模型的系統工程方法構建復雜系統（原書第2版）
- 新手易學：黑客攻防入門