- Avid Media Composer 6.x Cookbook
- Benjamin Hershleder
- 167字
- 2021-08-05 18:30:14
Modifying clips before capture
There will come a time when something needs to be changed before a clip is captured (modifying clips after they have been captured is covered in the next section). The following are the typical issues:
- The clips were logged by hand using the incorrect type of Timecode
- The clips were associated with the wrong tape
- The clips were created with the wrong tracks
How to do it...
Below are the steps to modify clips before capture:
- Select the clips. Some methods include Shift + clicking to select a range of clips or going to the Edit menu and choosing the Select-All command.
- Open the Modify window by using either of the following methods:
- From the Clip menu, select Modify
- Right-click on any of the selected Master Clips and choose Modify
- In the Modify window, click on the pull-down menu.
- In order to change the:
- Type of Timecode, choose Set Timecode Drop/Non-Drop
- Tape association, choose Set Source
- Add or remove tracks, choose Set Tracks
推薦閱讀
- 新媒體跨界交互設計
- 辦公通信設備維修
- 電腦常見故障現場處理
- Unity 5.x Game Development Blueprints
- Learning Game Physics with Bullet Physics and OpenGL
- 超大流量分布式系統架構解決方案：人人都是架構師2.0
- Advanced Machine Learning with R
- 快·易·通：2天學會電腦組裝·系統安裝·日常維護與故障排除
- 3D打印：Geomagic Design X5.1 逆向建模設計實用教程
- Hands-On Game Development with WebAssembly
- 51單片機應用開發從入門到精通
- Sketchbook Pro Digital Painting Essentials
- 3D打印：從全面了解到親手制作（全彩版）
- 現場總線技術及應用
- Avid Media Composer 6.x Cookbook