官术网_书友最值得收藏!

Building Wandboard images

Building images for one of the supported boards (for example, Wandboard Quad) follows the same process we described earlier for the QEMU machines, with the exception of using the setup-environment script, which is a wrapper around oe-init-build-env.

How to do it...

To build an image for the wandboard-quad machine, use the following commands:

$ cd /opt/yocto/fsl-community-bsp
$ mkdir -p wandboard-quad
$ MACHINE=wandboard-quad source setup-environment wandboard-quad
$ bitbake core-image-minimal

Note

The current version of the setup-environment script only works if the build directory is under the installation folder; in our case, /opt/yocto/fsl-community-bsp.

How it works...

The setup-environment script will create a build directory, set up the MACHINE variable, and prompt you to accept the Freescale EULA as described earlier. Your conf/local.conf configuration file will be updated both with the specified machine and the EULA acceptance variable.

Note

Remember that if you close your terminal session, you will need to set up the environment again before being able to use BitBake. You can safely rerun the setup-environment script as seen previously, as it will not touch an existing conf/local.conf file. Run the following:

$ cd /opt/yocto/fsl-community-bsp/
$ source setup-environment wandboard-quad

The resulting image, core-image-minimal.sdcard, which is created inside the build directory, can be programmed into a microSD card, inserted into the primary slot in the Wandboard CPU board, and booted using the following commands:

$ cd /opt/yocto/fsl-community-bsp/wandboard- quad/tmp/deploy/images/wandboard-quad/
$ sudo dd if=core-image-minimal.sdcard of=/dev/sdN bs=1M && sync

Here, /dev/sdN corresponds to the device node assigned to the microSD card in your host system.

Tip

Be careful when running the dd command, as it could harm your machine. You need to be absolutely sure that the sdN device corresponds to your microSD card and not a drive on your development machine.

See also

主站蜘蛛池模板: 东乌珠穆沁旗| 洪雅县| 佛山市| 兴宁市| 邵阳市| 偃师市| 武强县| 左云县| 额尔古纳市| 奈曼旗| 临西县| 贡嘎县| 无棣县| 巴青县| 大田县| 冀州市| 荔浦县| 扬州市| 石城县| 包头市| 上林县| 阿拉善右旗| 岳普湖县| 安仁县| 阳高县| 松溪县| 固镇县| 青川县| 西充县| 时尚| 林口县| 通化市| 诏安县| 威远县| 平远县| 舞阳县| 潜山县| 揭阳市| 鲁山县| 绩溪县| 扬州市|