- Programming the BeagleBone
- Yogesh Chavan
- 96字
- 2021-07-23 14:36:43
What you need for this book
The required hardware is as follows:
- BeagleBone Black or BeagleBone Green or BeagleBone White
- Micro SD card (4 GB+)
- One breadboard
- Ten Male-to-Male jumper wires (different colors)
- Ten LEDs
- Ten 470 Ohm resistor
- Single push button
- TMP36 sensor
- LDR
- Single 10k Ohm resistor
- Micro servo motor
- ADXL345 accelerometer module
- Nokia 5110 LCD module
The optional hardware is as follows:
- 5V 2A power adapter with 5.5 mm DC jack for BeagleBone Black and BeagleBone White (https://www.sparkfun.com/products/12889)
- 5V 2A micro USB power adapter for BeagleBone Green (https://www.sparkfun.com/products/12890)
- FTDI USB serial cable (https://www.adafruit.com/products/70)
推薦閱讀
- vSphere High Performance Cookbook
- Learning Data Mining with Python
- Getting Started with PowerShell
- 實用防銹油配方與制備200例
- 數據結構（Python語言描述）（第2版）
- Bootstrap Essentials
- Learning Data Mining with R
- Android玩家必備
- Hands-On Kubernetes on Windows
- Java圖像處理：基于OpenCV與JVM
- 大學計算機基礎
- 體驗之道：從需求到實踐的用戶體驗實戰
- 輕松學Scratch 3.0 少兒編程（全彩）
- INSTANT Apache Maven Starter
- OpenCV：Computer Vision Projects with Python