官术网_书友最值得收藏!

Identifying RCA solder points for analog video connections

Let's say you don't have HDMI or need to output video to a device that only accepts the older RCA video connections. With a little bit of soldering, this is very easy! On the Raspberry Pi, you will see two pins marked RCA. By attaching this to a standard RCA plug, you can output your video through this instead of (or even in addition to) the HDMI output.

Getting ready

If you just want to get started with HDMI, this is not a required recipe, and you can skip ahead. You will need:

  • A soldering iron
  • An RCA video connector
  • Connections that can be soldered from the cable to the connector
  • The board itself

How to do it...

  1. The TV pins in the figure are the connections you can use to connect RCA video to the Raspberry Pi:

    Raspberry Pi Zero RCA video

    Note

    "RCA Video" is technically referred to as Composite Video, and the connectors are typically yellow.

  2. Solder wires or connectors here that will connect to the RCA video plug.
主站蜘蛛池模板: 隆昌县| 加查县| 鸡西市| 岫岩| 太湖县| 汶川县| 泸定县| 屏边| 得荣县| 静安区| 新晃| 衡南县| 文昌市| 安国市| 巍山| 察雅县| 清涧县| 万年县| 迁西县| 西丰县| 石河子市| 巴青县| 台中市| 江安县| 榆林市| 沁水县| 水富县| 湖口县| 上杭县| 金门县| 浪卡子县| 新郑市| 施秉县| 平阴县| 遂溪县| 隆安县| 磐安县| 方正县| 文山县| 武穴市| 石柱|