Connecting and disconnecting Ethernet interfaces

Kali Linux makes it easy to manage network connections using network manager. This is how you will connect and disconnect network interfaces:

1. In the upper right-hand corner of the screen, click on the down arrow, which will provide various pieces of information about the current state of the computer:

1. You will see entries for both your eth0 and eth1 interfaces. If you have followed our guide, the eth0 network is connected to the NAT network and allows access to the internet and networks outside of your virtual machine. The eth1 interface is the host-only network, which connects to your test machine. You can toggle these on and off as required.