- GB 50633-2010(英文版)核電廠工程測量技術規范
- 中華人民共和國住房和城鄉建設部
- 7字
- 2020-09-24 18:19:39
2 Terms,Symbols,and Codes
2.1 Terms
2.1.1 Nuclear power station
A power station in which electricity is generated utilizing the nuclear power released in fission,generally consisting of primary circuit and secondary circuit.
2.1.2 Restricted area
An area with defined boundaries,operated under the effective control of the management personnel of nuclear power station.
2.1.3 Original point of surveying area
Reference point transferred from national or regional horizontal and vertical datum points,serving as the starting point for survey of whole nuclear power station area.Generally it is required where the national or regional datum points are remote from surveying area or inconvenient to use directly.
2.1.4 Primary control network
A set of control networks of required accuracy ratings throughout the nuclear power station site,established based on the original point of surveying area or the national or regional datum points to provide reference for positioning and setting out the buildings or structures and associated components during the early stage of civil construction and establishment of the secondary control network.
2.1.5 Secondary control network
Horizontal and vertical control networks consisting of a number of observation piers around the main power buildings including nuclear island and conventional island,established based on the primary control network to provide reference for positioning and setting out the main buildings or structures in the station,establishing micro-grid control network,monitoring deformations and partially densifying control points after the site ground is leveled.
2.1.6 Micro-grid control network
A small-sized survey control network of high accuracy consisting of a number of survey marks made on the concrete foundation slabs or platforms and the inter-visible penetrations reserved on floor slabs and walls in power buildings including nuclear island and conventional island,established based on the secondary control network to provide reference for determining and checking the positions of buildings or structures and installations,monitoring deformations,and partially densifying control points within power buildings.
2.1.7 Antenna phase center
Electrical center of microwave antenna,theoretically designed to coincide with the antenna's geometric center.
2.1.8 differential global position system
A navigation system which provides improved position accuracy for users by broadcasting DGPS differential corrections via radio beacons,mainly consisting of reference station,broadcast station,monitoring station,and monitor center.
- GB50551-2010球團機械設備安裝工程質量驗收規范(英文版)
- 工業企業技術改造升級投資指南:指南 解讀 案例(2023年版)
- 電力調度數據網絡工程設計規程
- GB/T 51216-2017 移動通信基站工程節能技術標準
- GB/T 51257-2017 液化天然氣低溫管道設計規范
- GB/T50663-2011核電廠工程水文技術規范(英文版)
- SH3011-2011石油化工工藝裝置布置設計規范(英文版)
- GB/T 50934-2013 石油化工工程防滲技術規范(英文版)
- DL/T5161.9-2002電氣裝置安裝工程質量檢驗及評定規程第9部分:蓄電池施工質量檢驗(英文版)
- GB/T 51243-2017 物聯網應用支撐平臺工程技術標準
- 鐵路罐車清洗設施設計標準
- SH/T 3405-2012 石油化工鋼管尺寸系列(英文版)
- DL/T5233-2010±800kV及以下直流換流站電氣裝置施工質量檢驗及評定規程(英文版)
- DL/T 5097-2014 火力發電廠貯灰場巖土工程勘測技術規程
- GB 50384-2016 煤礦立井井筒及硐室設計規范